Home >

Sewing Machine Sewing Process

2011/7/26 13:09:00 58

Machine sewing technology is sewing machine to stitch thread to connect garment piece to form a complete garment processing process.

The main processes are as follows:

Flat stitch: This is the most basic, most commonly used and most extensive machine sewing process in garment sewing.

Seam front

The opposite is the way to catch the line.

If the seams are separated from the sides by iron or fingernails, they are called separate seams or chop joints.

Flat seams are widely used for shoulder joint, side seam, sleeve seam, trousers side seam, lower crotch seam and so on.

When sewing, stop needles should be put back, so that the head can be removed and the stitching is smooth.

Stitch: stitch the two pieces of seams together and overlap them in the middle, so that the seam thickness can be reduced.

It is mainly used for the lining of the back seam, the lining of the cotton lined jacket and the interlining of the lining cloth.

Let's go and sew: it's also called cheese seam or reverse seam.

First will

Reverse side of seam

Instead, sew a line on the front, wrap the stubble head in the front seam, turn it over, and stitch it on the back side. It is mainly used for shirts, children's wear, sewing and sewing. It is used for sewing thin and thin materials without sewing and sewing.

It is also called bite seams. It is mostly used for collar, sleeve, mouth and waist.

There are two kinds of seam: inside and outside.

Outsourced joints are often used for sutures of men's shirts, trousers, jackets, Ka shirts and snowcoats. There are two sutures (1 sides of the line and bottom line) on the front, behind which is a bottom line, and the outer seams are called positive stitches.

The inner seam is often used for shoulder seam, side seam and sleeve seam. The stitching of polyester card or chemical fiber tunic and flat pants can be seen on the front side, and the bottom line is the reverse side.

Pressing seam: also called Ke stitch.

First press the seam according to the required stitch, then press it up according to the required position.

Open wire

。

Often used in men's trousers side seam, shirt shoulder, stickers and so on.

Roller stitching: only one suture can stitch the stubble of the seam seams evenly. One of the hem clips is wrapped with another suture.

The sewing method saves labor and saves the line, and uses thin and thin fabric to wrap the edges.

Partial pressure joint: also called split seam.

It is to press a line on the side of the seam on the basis of splitting, one is reinforcement, the other is to make the seam more smooth.

Used for crotch seams, sleeve joints and so on.