Home >

Or High Or Low &Nbsp; The Standard Supervision Mechanism Of Clothing Fabrics Is Difficult To Implement.

2011/6/25 9:44:00 49

On June 25th, a purchasing manager of a trading company in Hongkong encountered a difficult problem not long ago. He selected a pearl fiber fabric for foreign customers, but it was difficult for him to prove that the fabric contained pearl fiber component.

Moreover, reports issued by domestic testing organizations are not necessarily international.

market

Approval.

When it comes to the status quo of domestic standards, two kinds of voices are usually heard. One is that the threshold is too high, and the other is that the access standard is too low.

To sum up, it is difficult for the standard mechanism to play a regulatory role properly.

High threshold enterprises bear extra burden

High density fine denier thin fabric is a major development trend of chemical fiber products in recent years, such as nylon 20D.

Fabric

The weight is 35g / 15D, and the nylon fabric is lighter, softer and better in perspective.

Compared with the thicker nylon fabric, the strength index of high density fine denier product will be correspondingly reduced.

When discussing the issue with a purchasing director of a famous casual wear brand in China, she reluctantly indicated that because the national standards had not been followed up in time, enterprises could only adopt the existing high strength index coefficient for such new products. Although the enterprises also understood that this was unreasonable, the clothing brand enterprises did not dare to adopt it if the fabric strength was not up to standard.

This phenomenon is not uncommon in the industry. Whether it is fabric enterprises or downstream buyers, it is well aware that some of the domestic fabric standards are too high, but for prudent consideration, they will not arbitrarily reduce their standards.

They either choose to enforce or reject products that are not up to standard. Even so, some problems are hard to avoid.

It is understood that the current domestic standards require that the wet rubbing fastness of sanding cloth should reach more than 3.

Since this standard is a mandatory standard issued by the state in the past few years, some domestic Brand Company require that this standard be implemented.

In order to achieve this standard, domestic fabric enterprises are basically achieved through the use of some auxiliaries or coating treatment methods, but these practices usually have some negative effects.

A printing and dyeing auxiliaries in Shanghai say that from a professional technical point of view, this standard is in some respects.

fibre

Or the fabric can not be realized without special treatment on the fabric, but the special treatment such as chemical additives or coating can reach the requirement of wet rubbing fastness, but the feeling of fabric, moisture absorption and air permeability will be affected. In actual production, there are not many enterprises to choose this kind of treatment.

And there is no such mandatory requirement in the world. In most cases, international brands will set different standards according to the fabric type and color depth.

For example, light colored cotton fabrics may require wet rubbing fastness to be above 3~4 grade, while dark colors require 2~3 grade rather than unified mandatory requirement of 3 or more.

The actual situation also proves that the standard height does not mean that the insurance coefficient is high, nor is it equal to the high product quality. On the contrary, it will make the enterprise increase unnecessary additional burden because of rigidities and lack of flexibility. At the same time, it also makes the standard lose its applicability and authority.