Home >

New Trend, Shoe Material, Flocking, Color Leather

2008/12/29 14:29:00 41941

The emergence of flocking colored leather is not only a great supplement and development to the variety and color of leather fabrics, but also overcomes the shortcomings of the original leather dyed when it is not concentrated, not coloured or damaged, and can not be changed in a timely fashion with the color change of the market.

The color suede leather is made on the basis of the original finished leather, and is made of NIM (a piece of chopped fibers). The length of the nap is 0.1 ~ 3mm.

A strong network structure between NIRS and leather is formed through a cross linking chemical reaction with a special adhesive. The density of the suede leather from the Nannie "permanently" planted on the leather surface is more than 20 fluff per square millimeter.

The main products of the product are garments, gloves, bags and bags. Shoes and Hats Sofa, car cushion and other daily necessities.

Its characteristics are:

(1) chemical fiber fabrics are rich in colourful color and leather's biological properties. Compared with the multicolored chemical fiber fabrics, it is easy to reach all kinds of colors which are dyed by chemical fiber fabrics. Its color is much softer than that of chemical fiber fabrics, and is more three-dimensional and layered.

(2) because of the special electrostatic treatment, the confusion caused by the accumulation of static charge is avoided, which widens the application scope of leather, especially the use of it to make car lining material. It has both the luxurious and elegant tone and the essence of the leather, and solves the problem of the accumulation of electrostatic charge which has puzzled people for a long time.

(3) dry fastness of flocking suede is strong, 10000 times (GB / T13775), wet fastness is greater than 150 degrees C, and the tensile strength of finished leather is greater than 1 kg / mm (SG334-83).

What the new product is short of is that leather is made into leather and then made into leather. This gives consumers an illusion that it is a popular Nim or artificial leather in six and 70s.

Editor: vivi

  • Related reading

Present Situation And Future Innovation Of Neoprene Adhesive

Shoe material excipients
|
2008/12/29 14:25:00
41958

New Knowledge Of Sports Shoes And Shoes

Shoe material excipients
|
2008/12/29 14:13:00
41926

New Development Of Sports Shoes Soles And Surface Materials

Shoe material excipients
|
2008/10/14 10:04:00
41827

Big Recognition Of Sports Shoes And Shoes

Shoe material excipients
|
2008/10/10 14:07:00
41810

New Way For Shoes And Plastic Enterprises

Shoe material excipients
|
2008/10/10 11:40:00
41862
Read the next article

Method For Identifying Shoe Sole And Shoe Upper Material

At the bottom of PVC, there is an injection port, cut a small piece, ignite the flame beating with green edges, and extinguish the fire. At the bottom of the TPR, there is an injection port, cut a small piece, ignite the flame, and the burning place is melted. It will not extinguish itself from the fire, and can be dissolved in a stupid. There is no injection port at the bottom of EVA, a small piece of light is ignited, there is a phenomenon of candle burning and melting and dropping. Rubber bot